Digital TS switcher
Introduction
ST300 Digital TV TS switcher is a stream switching system based on ASI signal, which can monitor the stream, PID, form, etc. of the anchor program in real time. It can automatically switch to the alternate stream and program, and even manually switch to the pre-broadcast program in an emergency.
This product is simple and reliable in design, has complete switching strategy settings, and provides dual power supply and modular options, fully satisfying the emergency switching requirements of receivers and multiplexers.
Features
Fully compliant with MPEG-2 TS streaming standard
Support anchor, standby, and pre-broadcast TS stream signal input
Perform three-level detection on the input TS stream signal and make a judgment basis
Real-time stream monitoring, monitoring stream, PID, program table loss, errors and changes, and program descrambling errors
Millisecond-level fast switching, and provide automatic and manual switching, stream-level, PID-level switching and other switching strategies
In the automatic state, the output priority of the system is the main circuit - the backup circuit - the auxiliary circuit 1 - the auxiliary circuit 2
Support intelligent operation functions such as automatic fault recovery, power failure direct/memory, real-time alarm, log recording and query
Supports expandable modular design options to expand more interfaces and functions
Support front panel monitoring, Web network management, unified network management and SNMP multiple management methods
Support dual power supply
Technical Specifications
DVB-ASI interface:
Input interface: 3 main, standby, auxiliary (BNC, 75Ω)
Minimum acceptance sensitivity: 220mV
Maximum input voltage: 950Mv
Return loss: >9dB
Output interface: 3 channels (BNC, 75Ω)
Output amplitude: 800±80mv
Rise/fall time (20%~80%): ≤1200ps
Overshoot: <10%
Certainty jitter: <10%
Return loss: >9dB
Other interfaces
DB9: 1 way
GPI: 1 way
Network management control
Interface type: 1 RJ45 network port
Management method: Web network management, application configuration
Remote management: SNMP, supports third-party integration
Physical parameters
Power supply: Dual power supply, 100~240V AC (50~60Hz)
Size: 1RU, 480mmx400mmx44mm
Working temperature: 0~50℃